WCs
Showing all 5 results
-
Atlanta 2 Back to Wall Shrouded WC Pan
Atlanta 2 Back to Wall Shrouded WC Pan
Wall mounted WC pan with anti-vandal shroud, 400 mm high (normal installation height) x 360mm wide and 580mm wall projection. Rear inlet and P trap outlet suitable for duct location. Available in marine 316 grade on request. Suitable for use with leading WC frames.
-
Heavy Duty Seat and Cover
-
Plastic Seat Pads (factory fitted)
-
Springfield Combination WC and Washbasin Left Hand
Springfield Combination WC and Washbasin Left Hand
The Springfield is made from 1.4301 (304) grade stainless steel at a thickness of 1.5mm and 2mm. The unit is ideal for duct wall installations so that pipework is completely concealed. The unit can be fixed to the wall with suitable fixings down the rear flange of the unit via the security screwed access panel. The unit can supplied with a direct flushing valve or cistern as required. Handing can be left or right hand WC. The water outlet can be of a pushbutton type or sensor operated from a pre-mixed water supply (pre-mixer can be supplied), as well as the option to incorporate a drinking fountain bubbler for fresh water supply. The product is supplied with a presflow waste but higher levels of security wastes can also be specified. The drawing and image show a typical prison type unit, however layout and fitting can be made to suit individual configurations from a single unit to a complete prison. Products can be foam filled on request.
-
Washington Combination WC and Washbasin
Washington Combination WC and Washbasin
The Washington is made from 1.4301 (304) grade stainless steel at thickness of 2mm The unit is ideal for duct wall installations so that pipework is completely concealed. The unit can be fixed to the wall with suitable wall fixings down the rear flange of the unit accessed via the security screwed access panel. Handing can be left or right hand WC. The unit is flushed via a concealed cistern that is to be tank fed and is operated by a push button. Tap are hot and cold non concussive type. The WC can be flushed via flushing valve rather than cistern. The drawing and image show a typical prison type unit, however layout and fitting etc. can be made to suit individual configuration from a single unit to a complete prison. Products can be foam filled on request.
